[16] ENGINE ELECTRICAL - - CHARGING SYSTEM - ALTERNATOR ASSEMBLY - REMOVAL AND INSTALLATION <4G69>PRINT PAGE / INDEX / PRIOR / NEXT
REMOVAL AND INSTALLATION <4G69>
Pre-removal Operation
  • Under Cover Removal (Refer to GROUP 51, Under Cover ).
  • Drive Belt Removal (Refer to GROUP 11E, Crankshaft Pulley ).
Post-installation Operation
  • Drive Belt Installation (Refer to GROUP 11E, Crankshaft Pulley ).
  • Drive Belt Tension Check (Refer to GROUP 11E, On-vehicle Service ).
  • Under Cover Installation (Refer to GROUP 51, Under Cover ).

   



Removal steps


1.
 A/C compressor assembly connector


2.
 A/C compressor assembly connector clamp


3.
 Alternator connector


4.
 Alternator terminal


5.
 Connector bracket


6.
 Harness bracket
<<A>>
7.
 Alternator assembly


•
 Timing belt lower cover (Refer to GROUP 11E, Timing Belt ).


8.
 Alternator mounting bracket

REMOVAL SERVICE POINT
<<A>> ALTERNATOR ASSEMBLY REMOVAL
Remove the alternator assembly from above the vehicle.
[16] ENGINE ELECTRICAL - - CHARGING SYSTEM - ALTERNATOR ASSEMBLY - REMOVAL AND INSTALLATION <4G69>PRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation