DETONATION SENSOR
 CAUTION
Do not drop or hit the detonation sensor against other components. Internal damage may result, and the detonation sensor will need to be replaced.
   



Removal steps


1.
Detonation sensor connector connection
<<A>>
>>A<<
2.
Detonation sensor

REMOVAL SERVICE POINT
   
Use special tool detonation sensor wrench (MD998773) to remove the detonation sensor.
INSTALLATION SERVICE POINT
   
Use special tool detonation sensor wrench (MD998773) to tighten the detonation sensor to the specified torque.
©2004 Mitsubishi Motors Corporation