REMOVAL AND INSTALLATION <4G69>

[16] ENGINE ELECTRICAL - - IGNITION SYSTEM - DETONATION SENSOR - REMOVAL AND INSTALLATION <4G69>

CAUTION

Do not drop or hit the detonation sensor against other components. Internal damage may result, and the detonation sensor will need to be replaced.

Pre-removal and Post-installation Operation

Air Cleaner Removal and Installation (Refer to GROUP 15, Air Cleaner

			Removal steps
		1.	Detonation sensor connector connection
		2.	Detonation sensor clamp
		3.	Harness clamp
		4.	Intake manifold stay
<<A>>	>>A<<	5.	Detonation sensor
		6.	Detonation sensor connector bracket

REMOVAL SERVICE POINT

Use special tool detonation sensor wrench (MD998773) to remove the detonation sensor.

INSTALLATION SERVICE POINT

Use special tool detonation sensor wrench (MD998773) to tighten the detonation sensor to the specified torque.

[16] ENGINE ELECTRICAL - - IGNITION SYSTEM - DETONATION SENSOR - REMOVAL AND INSTALLATION <4G69>