[16] ENGINE ELECTRICAL - - IGNITION SYSTEM - ON-VEHICLE SERVICE - SPARK PLUG CHECK AND CLEANING<4G69-MIVEC>PRINT PAGE / INDEX / PRIOR / NEXT
SPARK PLUG CHECK AND CLEANING<4G69-MIVEC>
  1. Remove the spark plugs.
    2.  CAUTION
    • Do not attempt to adjust the gap of the iridium plug.
    • Always use a plug cleaner and finish cleaning within 20 seconds. Do not use wire brushes. Otherwise, the iridium tip may be damaged.
       
    1. Check the plug gap and replace if the limit is exceeded.
      • Standard value: 0.7 - 0.8 mm
      • Limit: 1.2 mm
       CAUTION
       Be careful not to allow foreign matter in cylinders.
    1. Clean the engine plug holes.
    1. Install the spark plugs.
    [16] ENGINE ELECTRICAL - - IGNITION SYSTEM - ON-VEHICLE SERVICE - SPARK PLUG CHECK AND CLEANING<4G69-MIVEC>PRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation