UNDER BODY <2400>
)
)
| No. |
Standard measurement point |
Hole shape |
Size mm |
|---|---|---|---|
| 1* |
Centre of under cover mounting hole |
Round |
8 |
| 2 |
Front sidemember inner notch |
- |
- |
| 3* |
Centre of crossmember mounting hole |
Round |
18 |
| 4* |
Centre of front floor sidemember positioning hole |
Round |
25 |
| 5* |
Centre of rear seat crossmember side water draining hole |
Oblong |
38 ×
22 |
| 6 |
Centre of rear floor sidemember water draining hole |
Round |
16 |
| 7* |
Centre of towing hook mounting hole |
Round |
15 |
| 8 |
Tip of centre bearing mounting bolt (4WD) (left-front side) |
- |
- |
| 9 |
Tip of centre bearing mounting bolt (4WD) (right-front side) |
- |
- |
| 10 |
Tip of centre bearing mounting bolt(4WD) (left-rear side) |
- |
- |
| 11 |
Tip of centre bearing mounting bolt (4WD) (right-rear side) |
- |
- |
NOTE: The *
mark indicates the mounting position for the frame centring gauge.
)
NOTE: The assumed standard line is established 100 mm below the measurement point No.4.
)
)
)
)
)
)
)
)