SUSPENSION INSTALLATION DIMENSIONS <2000>
)
)
| No. |
Standard measurement point |
Hole shape |
Size mm |
|---|---|---|---|
| 3 |
Centre of crossmember mounting hole |
Round |
18 |
| 4 |
Centre of front floor sidemember positioning hole |
Round |
25 |
| 12 |
Centre of front shock absorber mounting hole |
Round |
110 |
| 13 |
Centre of rear shock absorber mounting hole |
Round |
64 |
| 14 |
Tip of crossmember mounting bolt (left) |
- |
- |
| 15 |
Tip of crossmember mounting bolt (right) |
- |
- |
| 16 |
Centre of crossmember mounting hole |
Round |
11 |
| 17 |
Centre of trailing arm mounting position |
- |
- |
| 18 |
Centre of control link mounting position |
- |
- |
| 19 |
Centre of upper arm mounting position |
- |
- |
| 20 |
Centre of crossmember mounting hole |
Round |
13.5 |
| 21 |
Centre of crossmember mounting hole |
Round |
13.5 |
)
NOTE: The assumed standard line is established 100 mm below the measurement point No.4.
)
)
)