[2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B7. CHECK GEAR OIL LEVEL IN TRANSFER CASE (4WD)PRINT PAGE / INDEX / PRIOR / NEXT
B7. CHECK GEAR OIL LEVEL IN TRANSFER CASE (4WD)
       
    1. Remove the filler plug of the transfer case.
         
      1. Oil level should be at the lower portion of the filler plug hole.
      1. Check that the transfer oil is not noticeably dirty, and that it has a suitable viscosity.
      1. Tighten the filler plug to the specified torque.
        2. Tightening torque: 32 ± 2 N·m
      [2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B7. CHECK GEAR OIL LEVEL IN TRANSFER CASE (4WD)PRINT PAGE / INDEX / PRIOR / NEXT
      ©2004 Mitsubishi Motors Corporation