[2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B9. CHANGE GEAR OIL IN TRANSFER CASE (4WD)PRINT PAGE / INDEX / PRIOR / NEXT
B9. CHANGE GEAR OIL IN TRANSFER CASE (4WD)
       
    1. Remove oil filler plug and oil drain plug.
    1. Drain the gear oil.
         
      1. Before installing the plug, remove iron powder attached to the magnet of the drain plug.
        Tighten the oil drain plug to the specified torque.
        2. Tightening torque: 32 ± 2 N·m
      1. Fill the transfer case fresh oil by using a lubricator.
      1. Fill with specified oil till the level comes to the lower portion of oil filler plug hole.
        2. Specified transfer oil: Gear oil API classification GL-5 SAE 90
        Quantity: 0.55 L
      1. Tighten the oil filler plug to the specified torque.
        2. Tightening torque: 32 ± 2 N·m
      [2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B9. CHANGE GEAR OIL IN TRANSFER CASE (4WD)PRINT PAGE / INDEX / PRIOR / NEXT
      ©2004 Mitsubishi Motors Corporation