[2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B11. CHANGE GEAR OIL IN FRONT AND REAR DIFFERENTIALPRINT PAGE / INDEX / PRIOR / NEXT
B11. CHANGE GEAR OIL IN FRONT AND REAR DIFFERENTIAL
  1. Remove the drain plug to discharge the gear oil.
  1. Fit the drain plug and tighten it to the specified torque.
    2. Tightening torque: 64 ± 4 N·m
       
    1. Remove the filler plug and add the specified gear oil up to the bottom end of the filler plug hole.
      2. Specified gear oil: Gear oil API classification GL-5 or higher
      Above 10°C SAE 90
      Below 10°C SAE 80W
      Quantity: 0.55 L
    1. Fit the filler plug and tighten it to the specified torque.
      2. Tightening torque: 49 ± 9 N·m
    [2] PERIODIC INSPECTION AND MAINTENANCE - - OPERATIONS UNDER THE VEHICLE - B11. CHANGE GEAR OIL IN FRONT AND REAR DIFFERENTIALPRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation