)
)
Adhesive 1 : Urethane body sealer
Brand : 3M ATD Part No.8542 or equivalent
Brand : 3M ATD Part No.8542 or equivalent
Adhesive 2 : Epoxyayresin adhesive
Brand : 3M ATD Part No.8115 or equivalent
Brand : 3M ATD Part No.8115 or equivalent
)
Adhesive 1 : Urethane body sealer
Brand : 3M ATD Part No.8542 or equivalent
Brand : 3M ATD Part No.8542 or equivalent
Adhesive 2 : Epoxyayresin adhesive
Brand : 3M ATD Part No.8115 or equivalent
Brand : 3M ATD Part No.8115 or equivalent
)
NOTE ON REPAIR WORK
REMOVAL
)
The welding point is at the bottom of the roof rack bracket rear. Thus, remove the roof rack bracket rear and detach the welding point.
INSTALLATION
)
- When assembling the roof panel, apply in advance adhesive to the areas shown in the figure of the instructions.
Adhesive : Epoxyayresin adhesive
Brand : 3M ATD Part No.8115 or equivalent
Brand : 3M ATD Part No.8115 or equivalent
- Remove the roof rack bracket rear from the new parts. Weld the roof panel. Then assemble the roof rack bracket rear.