[11A] ENGINE MECHANICAL <4G6-SOHC> - - ON-VEHICLE SERVICE - DRIVE BELT TENSION CHECKPRINT PAGE / INDEX / PRIOR / NEXT
ON-VEHICLE SERVICE
DRIVE BELT TENSION CHECK
     CAUTION
     Check the drive belt tension after turning the crankshaft clockwise one turn or more.
   
  1. Make sure that the indicator mark is within the area marked with A in the illustration.
  1. If the mark is out of the area, replace the drive belt. (Refer to ).
    2. NOTE: The drive belt tension check is not necessary as auto-tensioner is adopted.
[11A] ENGINE MECHANICAL <4G6-SOHC> - - ON-VEHICLE SERVICE - DRIVE BELT TENSION CHECKPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation