LOCATION OF SYNTHETIC-RESIN PARTS

The location and material of each of the principal synthetic-resin parts are shown below.

<2000>

No.	Part name	Material	Abbreviation of material	Heat-resistant temperature (°C)
1	Radiator grille	Acrylonitrile butadiene styrene	ABS	80
2	Door mirror
3	Front roof rail cover
4	Rear roof rail cover
5	Roof spoiler
6	Headlamp	Polycarbonate	PC	120
7	Tailgate handle	Polycarbonate+Polyethylene	PC+PET	120
8	Rear door outside handle
9	Front door outside handle
10	Rear splash shield	Polyethylene	PE	100
11	Front splash shield	Polyethylene	PE	100
12	Rear wiper arm	Polyethylene terephthalate	PET	115
13	Delta cover inner	Polypropylene	PP	80
14	Inside rear view mirror
15	Quarter trim lower
16	Tailgate trim
17	Tailgate upper trim
18	Tailgate side trim
19	Tailgate lower trim
20	Rear end trim
21	Luggage floor centre lid
22	Luggage floor centre box
23	Rear scuff plate
24	Front scuff plate
25	Cowl side trim
26	Luggage floor side box	Polypropylene foam	PP-FOAM	80
27	Front bumper grille	Rubber denatured polypropylene	PP+E/P	80
28	Front bumper face
29	Rear bumper face
30	Side sill garnish
31	Front door trim	Talc filled polypropylene (10%)	PP-TD10 (PPF)	100-120
32	Centre pillar trim lower
33	Rear door trim
34	Front deck garnish	Talc filled polypropylene (20%)	PP-TD20 (PPF)	120-130
35	Instrument panel
36	Front pillar trim
37	Centre pillar trim upper
38	Quarter trim upper
39	Floor console
40	Instrument panel centre console
41	Instrument panel console side cover
42	Hood air inlet garnish (DOHC)		PPE+PA (PA+PPO)	185

NOTE:

If the material symbols designated by the ISO differ from the old symbols, both are given, with the old symboling enclosed in brackets.
ISO: International Standardization Organization.

A slash (/) in the material symbol indicates that two different materials make two-layer construction. A plus sign (+) indicates that the two different materials mix each other.

The indicated heat-withstand temperature for parts which are composed of two or more types of material is the value for the material with the lowest heat-withstand temperature.

The material symbols for synthetic-resin parts are embossed on the parts in hidden places.

<2400>

No.	Part name	Material	Abbreviation of material	Heat-resistant temperature (°C)
1	Radiator grille outer	Acrylonitrile butadiene styrene	ABS	80
2	Door mirror (Colour)
3	Roof spoiler
4	Tailgate garnish
5	Radiator grille inner	Acrylonitrile styrene acrylate	ASA (AAS)	80
6	Door mirror (Black)
7	Front roof rail cover
8	Centre roof rail cover
9	Rear roof rail cover
10	Headlamp	Polycarbonate	PC	120
11	Rear door outside handle	Polycarbonate+Polyethylene terephthalate	PC+PET	120
12	Front door outside handle	Polycarbonate+Polyethylene terephthalate	PC+PET	120
13	Front splash shield	Polyethylene	PE	100
14	Rear splash shield	Polyethylene	PE	100
15	Rear wiper arm	Polyethylene terephthalate	PET	115
16	Front bumper core	Polypropylene	PP	80
17	Rear bumper core
18	Air intake bezel
19	Delta cover inner
20	Inside rear view mirror
21	Quarter trim lower
22	Tailgate upper trim
23	Tailgate trim
24	Tailgate side trim
25	Tailgate lower trim
26	Rear end trim
27	Luggage floor centre lid
28	Luggage floor centre box
29	Rear scuff plate
30	Front scuff plate
31	Cowl side trim
32	Luggage floor side box	Polypropylene foam	PP-E	80
33	Centre cover	Rubber denatured polypropylene	PP+E/P	80
34	Front bumper face
35	Rear bumper extension
36	Rear over fender
37	Rear door over fender
38	Side sill garnish
39	Front over fender
40	Front bumper extension
41	Rear bumper face	Talc filled rubber modified polypropylene	PP+E/P-TD(HMPP)	80-100
42	Front door trim	Talc filled polypropylene (10%)	PP-TD10 (PPF)	100-120
43	Centre pillar trim, lower
44	rear door trim
45	Front deck garnish	Talc filled polypropylene (20%)	PP-TD20 (PPF)	120-130
46	Front pillar trim
47	Centre pillar trim upper
48	Quarter trim upper
49	Floor console rear
50	Floor console panel
51	Floor console front
52	Lower side cover
53	Instrument panel

NOTE:

If the material symbols designated by the ISO differ from the old symbols, both are given, with the old symboling enclosed in brackets.
ISO: International Standardization Organization.

A slash (/) in the material symbol indicates that two different materials make two-layer construction. A plus sign (+) indicates that the two different materials mix each other.

The indicated heat-withstand temperature for parts which are composed of two or more types of material is the value for the material with the lowest heat-withstand temperature.

The material symbols for synthetic-resin parts are embossed on the parts in hidden places.