| [17] ENGINE AND EMISSION CONTROL - - AUTO-CRUISE CONTROL <4G64-VEHICLES WITH AUTO-CRUISE CONTROL SYSTEM> - DIAGNOSTIC TROUBLE CODE PROCEDURES - Code No.16 Auto-cruise Control-ECU System | PRINT PAGE / INDEX / PRIOR / NEXT |
DIAGNOSIS CODE SET CONDITIONS
This diagnosis code is set if there is an abnormality in the cancel hold circuit or the microprocessor monitor circuit in the auto-cruise control-ECU. | |
PROBABLE CAUSE
Malfunction of the auto-cruise control-ECU. | |
DIAGNOSIS
Replace the auto-cruise control-ECU (Refer to  ). Then check that MUT-II/III diagnosis code No. 16 is not set. | |
| [17] ENGINE AND EMISSION CONTROL - - AUTO-CRUISE CONTROL <4G64-VEHICLES WITH AUTO-CRUISE CONTROL SYSTEM> - DIAGNOSTIC TROUBLE CODE PROCEDURES - Code No.16 Auto-cruise Control-ECU System | PRINT PAGE / INDEX / PRIOR / NEXT |