EVAPORATIVE EMISSION VENTILATION SOLENOID CHECK
       
    1. Connect a hand vacuum pump to nipple (A) of the solenoid.
    1. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and without applying voltage.
    Battery Voltage
    Normal Condition
    Applied
    Vacuum maintained
    Not applied
    Vacuum leaks
         
      1. Measure the resistance between the terminals of the solenoid.
      2. Standard value: 17 - 21 Ω (at 20°C)
      ©2004 Mitsubishi Motors Corporation