SPECIAL TOOLS
Tool
Number
Name
Use
    MB991223
A: MB991219
B: MB991220
C: MB991221
D: MB991222
Harness set
A: Test harness
B: LED harness
C: LED harness adapter
D: Probe
  • Check at the ECU terminals
    A: Connector pin contact inspection
    B: Power circuit inspection
    C: Power circuit inspection
    D: Commercial tester connection
    MB991502
MUT-II sub assembly
  • Reading diagnosis code
  • MPI system inspection
    MB991955
A: MB991824
B: MB991827
C: MB991910
D: MB991911
E: MB991825
F: MB991826
MUT-III sub assembly
  • A: Vehicle communication interface (V.C.I.)
  • B: MUT-III USB cable
  • C: MUT-III main harness A (Vehicles with CAN communication system)
  • D: MUT-III main harness B (Vehicles without CAN communication system)
  • E: MUT-III measurement adapter
  • F: MUT-III trigger harness
  • Reading diagnosis code
  • MPI system inspection
  • Measurement of fuel pressure
    MB991348
Test harness set
  • Measurement of voltage during troubleshooting
  • Inspection using an oscilloscope
    MB991709
Test harness
  • Measurement of voltage during troubleshooting
  • Inspection using an oscilloscope
  • Inspection of idle control servo
    MD998478
Test harness (3-pin, triangle)
  • Measurement of voltage during Troubleshooting
  • Inspection using an oscilloscope
    MD991536
Check harness for throttle position sensor adjustment
  • Measurement of voltage during Troubleshooting
  • Adjusting of throttle position sensor
    MB991658
Test harness
  • Measurement of voltage during Troubleshooting
  • Inspection of oxygen sensor
    MD998709
Adaptor hose
Measurement of fuel pressure
    MD998742
Hose adaptor
    MB991637
Fuel pressure gauge set
    MD998299
MAS screwdriver
Mixture adjusting screw (variable resistor) check
    MD998706
Injector test set
Checking the spray condition of injectors
    MB991607
Injector test harness
    MD998741
Injector test adaptor
    MB991608
Clip

©2004 Mitsubishi Motors Corporation