)
)
- Disconnect the air flow sensor connector.
- Measure resistance between terminals No. 5 and No. 6.
- 13 -
17 kΩ
(at
-20°C ) - 5.3 -
6.7 kΩ
(at
0°C ) - 2.3 -
3.0 kΩ
(at
20°C ) - 1.0 -
1.5 kΩ
(at
40°C ) - 0.56 -
0.76 kΩ
(at
60°C ) - 0.30 -
0.42 kΩ
(at
80°C )
Standard value:
- Remove the air flow sensor
)
- Measure resistance while heating the sensor using a hair drier.
| Temperature ( |
Resistance (kΩ) |
|---|---|
| Higher |
Smaller |
- If the value deviates from the standard value or the resistance remains unchanged, replace the air flow sensor assembly.
- Install the air flow sensor and tighten it to the specified torque.
Tightening torque: 8.8 ±
1 N·m