CAUTION)
)
- Remove the engine coolant temperature sensor.
)
- With temperature sensing portion of engine coolant temperature sensor immersed in hot water, check resistance.
- 14 -
17 kΩ
(at
-20°C ) - 5.1 -
6.5 kΩ
(at
0°C ) - 2.1 -
2.7 kΩ
(at
20°C ) - 0.9 -
1.3 kΩ
(at
40°C ) - 0.48 -
0.68 kΩ
(at
60°C ) - 0.26 -
0.36 kΩ
(at
80°C )
Standard value:
- If the resistance deviates from the standard value greatly, replace the sensor.
)
- Apply sealant to threaded portion.
- 3M NUT Locking Part No. 4171 or equivalent
Specified sealant:
- Install the engine coolant temperature sensor and tighten it to the specified torque.
Tightening torque: 29 ±
10 N·m