4G63
The fuel tank assembly consists of the following components.
  • Fuel high-pressure hose
  • Fuel pump suction tube <4WD>
  • Fuel tank safety valve
  • Fuel tank
  • Fuel tank gauge unit
  • Fuel pump assembly <2WD>
  • Fuel tank pump and gauge assembly <4WD>
The fuel pump assembly <2WD>, fuel tank pump and gauge assembly <4WD> consists of the following components.
  • Fuel tank pump
  • Fuel tank filter assembly
  • Fuel tank gauge unit <4WD>
The fuel tank assembly is located under the floor of the rear passenger seat, and has the following features.
  • The fuel tank is made of pre-coat alloy molten zinc steel plate, which does not contain tin alloy.
  • The fuel tank pump and fuel tank filter assembly have been integrated into a single fuel tank pump and gauge assembly.
  • The fuel tank pump and gauge assembly is housed in the fuel tank to improve collision safety.
  • The fuel tank safety valve prevents fuel leaks when the vehicle has leaned or rolled over.
  • The fuel high-pressure hose, fuel pump suction tube, fuel return hose and fuel vapour hose are made of a material, which does not allow fuel vapour to pass through it as much as possible.
CONSTRUCTION DIAGRAM
       
4G64
The fuel tank assembly consists of the following components.
  • Fuel high-pressure hose
  • Fuel pump suction tube
  • Fuel tank safety valve
  • Fuel tank
  • Fuel tank gauge unit
  • Fuel tank pump and gauge assembly
The fuel tank pump and gauge assembly consists of the following components.
  • Fuel tank pump
  • Fuel tank filter assembly
  • Fuel tank gauge unit
CONSTRUCTION DIAGRAM
   
4G69
The fuel tank assembly consists of the following components.
  • Fuel high-pressure hose
  • Fuel pump suction tube
  • Fuel tank safety valve
  • Fuel tank
  • Fuel tank gauge unit
  • Fuel tank pump and gauge assembly (incorporating fuel pump pressure regulator)
  • Fuel tank levelling valve assembly <Vehicles for Brazil and Chile>
  • Fuel filler neck valve <Vehicles for Brazil and Chile>
  • Fuel tank temperature sensor <Vehicles for Brazil and Chile>
The fuel tank pump and gauge assembly consists of the following components.
  • Fuel tank pump
  • Fuel tank filter assembly
  • Fuel tank gauge unit
  • Fuel pump pressure regulator
  • Fuel tank differential pressure sensor <Vehicles for Brazil and Chile>
CONSTRUCTION DIAGRAM
       
©2004 Mitsubishi Motors Corporation