)
>>A<<
INJECTOR INSTALLATION
- Apply a thin coat of engine oil to a new O-ring.
- Insert the injector into the delivery pipe while turning it in both directions carefully not to damage the O-ring.
CAUTION- Check that the injector turns smoothly. If it does not, the O-ring may be jamming, so remove the injector and check the O-ring for damage. If the O-ring is intact, insert the injector into the delivery pipe and check it for smooth rotation again.
>>B<<
FUEL PRESSURE REGULATOR INSTALLATION
- Apply a thin coat of engine oil to a new O-ring.
- Insert the fuel pressure regulator into the delivery pipe while turning it in both directions carefully not to damage the O-ring.
CAUTION- Check that the fuel pressure regulator turns smoothly. If it does not, the O-ring may be jamming, so remove the fuel pressure regulator and check the O-ring for damage. If the O-ring is intact, insert it into the delivery pipe and check it for smooth rotation again.
)
Install the throttle body gasket with its tab located as shown in the drawing.