)
<Except Hong Kong>
)
| Removal steps |
|||
|---|---|---|---|
| 1. |
Engine hanger |
||
| 2. |
Exhaust manifold cover |
||
| 3. |
Exhaust manifold |
||
| 4. |
Exhaust manifold gasket |
)
Using special tool Oxygen sensor wrench (MD998770), removal the oxygen sensor.
)
Check to ensure that the exhaust manifold bracket "B" is in close contact with the exhaust
manifold and the cylinder block before tightening the respective mounting bolts to the specified torque.
Using special tool Oxygen sensor wrench (MD998770), installation the oxygen sensor.