<L.H. DRIVE VEHICLES>
Pre-removal and Post-installation Operation
|
)
| 1. |
Head restraint |
||
| 2. |
Heated seat switch <Option - Vehicles for Argentina> |
||
| Front seat assembly removal steps |
|||
|---|---|---|---|
| 3. |
Front seat anchor cover |
||
| 4. |
Seat anchor cover outer |
||
| 5. |
Seat anchor cover inner |
||
| 6. |
Heater harness connector <Option - Vehicles for Argentina> |
||
| 7. |
Seat belt switch connector <GCC (Driver’s side)> |
||
>>A<< |
8. |
Front seat assembly |
<R.H. DRIVE VEHICLES>
CAUTION
and
Air Bag Module and Clock Spring .Pre-removal and Post-installation Operation
|
)
| 1. |
Head restraint |
||
| Front seat assembly removal steps |
|||
|---|---|---|---|
| 2. |
Front seat anchor cover |
||
| 3. |
Seat anchor cover outer |
||
| 4. |
Seat anchor cover inner |
||
| 5. |
Seat belt switch connector <Vehicles for Hong Kong and Australia
(Driver’s side)> |
||
| 6. |
Side-air bag module (squib) connector <Vehicles with side-air bag
system> |
||
| >>A<< |
7. |
Front seat assembly |
)
- Temporarily tighten the nuts and bolts in all mounting locations shown in the illustration with no load applied to the front seat cushion and check the operation of the seat slide.
- Tighten the nuts and bolts in all mounting locations to the specified torque.