[52A] INTERIOR - - FRONT SEAT BELT - REMOVAL AND INSTALLATIONPRINT PAGE / INDEX / PRIOR / NEXT
FRONT SEAT BELT
REMOVAL AND INSTALLATION
 CAUTION
 SRS: Before removing and installing the seat belts with pre-tensioner, refer to GROUP 52B, Seat Belt with Pre-tensioner .
Pre-removal and Post-installation Operation
  • Turn the ignition key to the LOOK (OFF) position.
  • Disconnect the negative battery terminal.

   
     
Outer seat belt removal steps


1.
 Sash guide cover


•
 Centre pillar trim lower (Refer to ).


2.
 Bracket


3.
 Outer seat belt (Refer to GROUP 52B, Seat Belt with Pre-tensioner ).


4.
 Centre pillar trim upper (Refer to ).


5.
 Adjustable seat belt anchor



Inner seat belt removal steps


6.
 Harness connector (Driver’s side) <Vehicles for GCC, Hong Kong and Australia>


•
 Shield cover (Refer to ).


7.
 Inner seat belt

[52A] INTERIOR - - FRONT SEAT BELT - REMOVAL AND INSTALLATIONPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation