Remove the door trim, and then connect the battery to the door mirror assembly connector to check that the door mirror operates.

Battery connection	Direction operation
Connect terminal 3 to the negative battery terminal. Connect terminal 5 to the positive battery terminal.	Up
Connect terminal 3 to the positive battery terminal. Connect terminal 5 to the negative battery terminal.	Down
Connect terminal 3 to the negative battery terminal. Connect terminal 4 to the positive battery terminal.	Right
Connect terminal 3 to the positive battery terminal. Connect terminal 4 to the negative battery terminal.	Left
Connect terminal 6 to the positive battery terminal. Connect terminal 7 to the negative battery terminal.	Retract
Connect terminal 6 to the negative battery terminal. Connect terminal 7 to the positive battery terminal.	Return

Switch position		Tester connection	Specified condition
OFF		1 - 2, 1 - 3, 1 - 4, 1 - 6, 1 - 10, 1 - 11, 2 - 9, 3 - 9, 6 - 9, 9 - 10, 9 - 11	Open circuit
Left side	OFF	1 - 6, 1 - 10, 1 - 11, 6 - 9, 9 - 10, 9 - 11	Open circuit
	Up	1 - 6, 9 - 11	Less than 2 ohms
	Down	1 - 11, 6 - 9
	Right	1 - 6, 9 - 10
	Left	1 - 10, 6 - 9
Right side	OFF	1 - 2, 1 - 3, 1 - 6, 2 - 9, 3 - 9, 6 - 9	Open circuit
	Up	1 - 6, 3 - 9	Less than 2 ohms
	Down	1 - 3, 6 - 9
	Right	1 - 6, 2 - 9
	Left	1 - 2, 6 - 9
Retract and return		1 - 4	Less than 2 ohms