MARK
   


1.
Front three-diamond mark

>>A<<
2.
Rear three-diamond mark

>>A<<
3.
4WD decal

>>A<<
4.
TURBO mark <2000 - DOHC>

>>A<<
5.
20V mark

>>A<<
6.
AIRTREK mark <Standard - Vehicles for Hong Kong, Option - Vehicles for New Zealand>

INSTALLATION SERVICE POINT
       
       
       
       
   
  1. Clean the mark installation surfaces on the body with unleaded petrol.
     CAUTION
    When attaching the marks, the ambient temperature should be 20 - 38°C and the air should be completely free of dust. If the ambient temperature is lower than 20°C, the marks and the places on the vehicle body where the marks are to be attached should be heated to 20 - 38°C.
  1. Peel off the protection sheet on the back of the mark to paste it on the installation position.
©2004 Mitsubishi Motors Corporation