Pre-removal Operation
|
Post-installation Operation
|
)
| Radiator removal steps |
|||
|---|---|---|---|
| 1. |
Drain plug |
||
| 2. |
Radiator cap |
||
| 3. |
Radiator condenser tank hose |
||
| 4. |
Radiator condenser tank assembly |
||
<<A>> |
>>A<< |
5. |
Radiator upper hose |
| <<A>> |
>>A<< |
6. |
Radiator lower hose |
| <<B>> |
7. |
A/T fluid cooler hose connection |
|
| 8. |
A/T fluid cooler hose |
||
| 9. |
Cooling fan controller connector connection |
||
| 10. |
Upper insulator |
||
| 11. |
Radiator assembly |
||
| 12. |
Lower insulator |
||
| 13. |
Cooling fan controller |
||
| 14. |
A/T fluid cooler hose assembly |
||
| 15. |
A/T fluid cooler tube assembly |
||
| 16. |
A/T fluid cooler feed hose |
||
| 17. |
Condenser fan motor assembly |
||
| 18. |
Cooling fan motor assembly |
||
| Cooling fan motor assembly removal steps |
|||
| 3. |
Radiator condenser tank hose |
||
| <<A>> |
>>A<< |
5. |
Radiator upper hose |
| 17. |
Condenser fan motor assembly |
||
| 18. |
Cooling fan motor assembly |
||
| 19. |
Cooling fan |
||
| 20. |
Cooling fan motor |
||
| 21. |
Cooling fan shroud |
REMOVAL SERVICE POINTS
)
Make mating marks on the radiator hose and the hose clamp. Disconnect the radiator hose.
INSTALLATION SERVICE POINT
)
- Insert each hose as far as the projection of the water inlet fitting.
- Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.