Pre-removal Operation
|
Post-installation Operation
|
)
| Radiator removal steps |
|||
|---|---|---|---|
| 1. |
Drain plug |
||
| 2. |
O-ring |
||
| 3. |
Radiator cap |
||
| 4. |
Radiator condenser tank hose |
||
| 5. |
Radiator condenser tank assembly |
||
| 6. |
Cooling fan controller connector |
||
<<A>> |
>>A<< |
7. |
Radiator upper hose |
| <<A>> |
>>A<< |
8. |
Radiator lower hose |
| <<B>> |
9. |
A/T fluid cooler hose connection |
|
| 10. |
Upper insulator |
||
| 11. |
Radiator assembly |
||
| 12. |
Lower insulator |
||
| 13. |
A/T fluid cooler hose assembly |
||
| 14. |
Cooling fan controller |
||
| 15. |
Cooling fan motor &
shroud assembly |
||
| Cooling fan motor removal steps |
|||
| 4. |
Radiator condenser tank hose |
||
| 6. |
Cooling fan controller connector |
||
| <<A>> |
>>A<< |
7. |
Radiator upper hose |
| 15. |
Cooling fan assembly |
||
| 16. |
Cooling fan (LH) |
||
| 17. |
Cooling fan motor (LH) |
||
| 18. |
Cooling fan (RH) |
||
| 19. |
Cooling fan (RH) motor |
||
| 20. |
Cooling fan shroud |
REMOVAL SERVICE POINTS
)
Make mating marks on the radiator hose and the hose clamp. Disconnect the radiator hose.
INSTALLATION SERVICE POINT
)
- Insert each hose as far as the projection of the water inlet fitting.
- Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.