[14] ENGINE COOLING - - WATER PUMP - REMOVAL AND INSTALLATION <4G69-SOHC>PRINT PAGE / INDEX / PRIOR / NEXT
REMOVAL AND INSTALLATION <4G69-SOHC>
Pre-removal Operation
  • Engine Coolant Draining (Refer to ).
  • Timing Belt Removal (Refer to GROUP 11E, Timing Belt ).
Post-installation Operation
  • Timing Belt Installation (Refer to GROUP 11E, Timing Belt ).
  • Engine Coolant Refilling (Refer to ).

   



Removal steps


1.
 Water pump


2.
 Water pump gasket

>>A<<
 3.
 O-ring

INSTALLATION SERVICE POINT
>>A<< O-RING INSTALLATION
   
Fit the O-ring to the groove in the water inlet pipe. Then lubricate the O-ring and the inside of the water pump with water, and then insert the pipe to the water pump.
[14] ENGINE COOLING - - WATER PUMP - REMOVAL AND INSTALLATION <4G69-SOHC>PRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation