According to the adjustment mode entry conditions of the input switch, the following functions can be adjusted. The data on adjustment will be memorized even if the battery is removed.
Function
|
Adjustment procedure
|
|---|
Keyless entry system hazard answerback function
|
When the lock button of the transmitter is pressed twice continuously within two seconds, the hazard answerback function during the lock state will be switched between available or unavailable.
- Function available: Tone alarm sounds once. (Initial state)
- Function not available: Tone alarm sounds twice.
When the unlock button of the transmitter is pressed twice continuously within two seconds, the hazard answerback function during the unlock state will be switched between available or unavailable.
- Function available: Tone alarm sounds once. (Initial state)
- Function not available: Tone alarm sounds twice.
|
Vehicle speed-dependent wiper function
|
When the windshield wiper mist switch is turned ON for more than two seconds, the vehicle speed-dependent wiper function is switched between available or unavailable.
- Function available: Tone alarm sounds once. (Initial state)
- Function not available: Tone alarm sounds twice.
|
Headlamp automatic-shutdown function
|
When the passing switch is turned ON for more than two seconds with the auto-lamp switch ON and the turn-signal lamp switch turned to RH, the headlamp automatic-shutdown function is switched between available or unavailable.
- Function not available: Tone alarm sounds twice.
- Function available: (when the tail lamp illuminates with the ignition switch turned to the "LOCK" (OFF) position, it is not automatically turned off): Tone alarm sounds three times. (Initial state)
|
Dimmer interior lamp control function
|
When the turn-signal lamp switch is set in the order of RH to LH to RH to LH within three seconds from the LH position, the delayed lamp-off time switches (Returns to a after e, and repeats from a in order.)
- 30 seconds: Tone alarm sounds once. (Initial state)
- 10 seconds: Tone alarm sounds twice.
- 0 seconds (No delay time): Tone alarm sounds three times.
- 15 seconds: Tone alarm sounds four times.
- 7.5 seconds: Tone alarm sounds five times.
|
Interior lamp automatic-shutoff function
|
When the hazard lamp switch is turned ON for more than two seconds, the interior lamp automatic shutoff function switches in the following order. (a and b switches alternately)
- Function available: Tone alarm sounds once. (Initial state)
- Function not available: Tone alarm sounds twice.
|
Initialization of all functions
|
When the windshield washer switch is ON for more than 20 seconds continuously, the tone alarm sounds twice, and all functions will be initialized. (Settings are returned to their initial states.) The adjustment mode entry tone alarm sounds after 10 seconds, however to initialize all functions, the ON state will continue for 20 seconds. When the windshield washer switch is ON for more than 20 seconds continuously without the adjustment mode set, the adjustment mode will be set after 10 seconds without the initialization of all functions.
|