COMMENTS ON TROUBLE SYMPTOM
If the passenger's and/or rear power window does not work by means of the power window main switch, the power window main switch or the respective power window sub switch(es) may be defective.POSSIBLE CAUSES
- Malfunction of the power window main switch
- Malfunction of the power window sub switch (front RH), power window sub switch (rear RH) or power window sub switch (rear LH)
- Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
Step 1. Check the power window main switch.
Q: Is the check result normal?
YES:
Go to Step 2
.NO: Refer to Inspection Procedure D-2 "Driver's power window does not work by means of the power window main switch <Except vehicles for Argentina>
."Step 2. Check the power window sub switch.
Q: Is the check result normal?
YES:
Go to Step 3.NO: Refer to Inspection Procedure D-3 "Relevant power window(s) do not work by means of the front and rear passenger's power window sub switches <LH drive vehicles except for Argentina>
."Step 8. Check the wiring harness from E-17 power window sub switch (front RH) connector terminals 4 and 8 to E-05 power window main switch connector terminals 3 and 11.
NOTE: Prior to the wiring harness inspection, check intermediate connectors C-15, C-118, E-12 and E-24, and repair if necessary.
- Check the power window operation line for open circuit.
Q: Is the check result normal?
YES:
The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How to Cope with Intermittent Malfunction ).NO: Repair the wiring harness.
Step 11. Check the wiring harness from E-21 power window sub switch (rear RH) connector terminals 4 and 8 to E-05 power window main switch connector terminals 14 and 6.
NOTE: Prior to the wiring harness inspection, check intermediate connectors C-13, C-118, D-01, E-12 and E-27, and repair if necessary.
- Check the power window operation line for open circuit.
Q: Is the check result normal?
YES:
The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How to Cope with Intermittent Malfunction ).NO: Repair the wiring harness.
Step 14. Check the wiring harness from E-01 power window sub switch (rear LH) connector terminals 4 and 8 to E-05 power window main switch connector terminals 1 and 2.
NOTE: Prior to the wiring harness inspection, check intermediate connectors C-117, C-118, D-25, E-09 and E-12, and repair if necessary.
- Check the power window operation line for open circuit.
Q: Is the check result normal?
YES:
The trouble can be an intermittent malfunction (Refer to GROUP 00 -
How to Cope with Intermittent Malfunction ).NO: Repair the wiring harness.