INSPECTION PROCEDURE F-4: Sunroof anti-trap function does not work normally.

[54D] SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR <Except for Hong Kong spec.> - - SYMPTOM PROCEDURES - SUNROOF - INSPECTION PROCEDURE F-4: Sunroof anti-trap function does not work normally.

PRINT PAGE / INDEX / PRIOR / NEXT


INSPECTION PROCEDURE F-4: Sunroof anti-trap function does not work normally.
	CAUTION Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.

	COMMENTS ON TROUBLE SYMPTOM If the sunroof anti-trap function does not work, the sunroof motor assembly (sunroof-ECU) may be defective.
	POSSIBLE CAUSES Malfunction of the sunroof motor assembly (sunroof-ECU)
	DIAGNOSIS PROCEDURE

	Retest the system. Check that the sunroof anti-trap function work normally. Q: Is the check result normal? YES: The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ). NO: Replace the sunroof motor assembly.

[54D] SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR <Except for Hong Kong spec.> - - SYMPTOM PROCEDURES - SUNROOF - INSPECTION PROCEDURE F-4: Sunroof anti-trap function does not work normally.

PRINT PAGE / INDEX / PRIOR / NEXT