[54D] SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR <Except for Hong Kong spec.> - - TROUBLESHOOTING - PRIOR TO TROUBLESHOOTINGPRINT PAGE / INDEX / PRIOR / NEXT
TROUBLESHOOTING
PRIOR TO TROUBLESHOOTING
Before carrying out troubleshooting, check the following two items.
  • Make sure that the ETACS-ECU, the junction block (J/B), the front-ECU and the engine compartment relay box are connected securely.
  • Check that the system fuses and fusible links are not burned out.
[54D] SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR <Except for Hong Kong spec.> - - TROUBLESHOOTING - PRIOR TO TROUBLESHOOTINGPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation