[54E] SMART WIRING SYSTEM (SWS) USING SWS MONITOR <Except for Hong Kong spec.> - - TROUBLESHOOTING - HOW TO CONNECT THE SWS MONITORPRINT PAGE / INDEX / PRIOR / NEXT
HOW TO CONNECT THE SWS MONITOR
 CAUTION
 Always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting the SWS monitor and the MUT-II/III.
HOW TO CONNECT THE SWS COMMUNICATION LINE <SWS MONITOR HARNESS (FOR COLUMN-ECU)>
       
    1. Remove the steering column cover.
    1. Remove the steering column switch connector.
    1. Connect the SWS monitor harness (for column-ECU).
    HOW TO CONNECT THE SWS COMMUNICATION LINE <SWS MONITOR HARNESS (FOR 13-PIN CONNECTOR)>
           
    Connect the SWS monitor harness (for 13-pin connector) to the diagnosis connector (13-pin connector).
    [54E] SMART WIRING SYSTEM (SWS) USING SWS MONITOR <Except for Hong Kong spec.> - - TROUBLESHOOTING - HOW TO CONNECT THE SWS MONITORPRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation