The differential specifications are established as follows.
SPECIFICATIONS
| Item |
Specification |
|||
|---|---|---|---|---|
| Reduction gear type |
Hypoid gear |
|||
| Reduction ratio |
3.312 |
|||
| Differential gear type (Type ×
number
of gears) |
Side gear |
Straight bevel gear ×
2 |
||
| Pinion gear |
Straight bevel gear ×
2 |
|||
| Number of teeth |
Drive gear |
53 |
||
| Drive pinion |
16 |
|||
| Side gear |
14 |
|||
| Pinion gear |
10 |
|||
| Bearing (Outside diameter ×
inside
diameter) mm |
Side |
72 ×
35 |
||
| Front |
62 ×
25 |
|||
| Rear |
72 ×
35 |
|||
| Differential gear oil |
Type |
Hypoid gear oil API classification GL-5 or higher SAE viscosity
No.90, 80W |
||
| Amount L |
0.55 |
|||
DIFFERENTIAL MOUNT
<2000-Turbo>
)
- The differential carrier is supported by the differential mount bracket and differential support member on the front side, and is secured to the rear suspension crossmember with a bushing. It is supported by the differential support arm at the rear, and is secured to the rear suspension crossmember with a bushing.
- The differential support arm bushings and differential support member bushings to absorb vibration from the suspension.
<2400>
)
- The differential carrier is supported by the differential mount bracket on the front side, and is secured to the rear suspension crossmember with a bushing. It is supported by the differential support arm at the rear, and is secured to the rear suspension crossmember with a bushing.
- The differential support arm bushings to absorb vibration from the suspension.
- The weight is used to reduce differential gear noise.