[23C] AUTOMATIC TRANSMISSION OVERHAUL <W5A5> - - OIL PUMP - DISASSEMBLY AND REASSEMBLYPRINT PAGE / INDEX / PRIOR / NEXT
OIL PUMP
DISASSEMBLY AND REASSEMBLY
   



Disassembly steps

>>B<<
 1.
 O-ring


2.
 Seal ring

>>A<<
 3.
 Oil seal


4.
 Oil pump

REASSEMBLY SERVICE POINTS
>>A<< OIL SEAL INSTALLATION
   
Use the special tool Oil seal installer (MD998334) to install the oil seal.
>>B<< O-RING INSTALLATION
Install a new O-ring in the groove on the periphery of the oil pump, and apply ATF, blue petrolatum jelly or white Vaseline to the periphery of the O-ring.
[23C] AUTOMATIC TRANSMISSION OVERHAUL <W5A5> - - OIL PUMP - DISASSEMBLY AND REASSEMBLYPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation