)
)
CAUTION)
- Insert a rag so as to avoid boot damage, and remove the propeller shaft assembly in a straight and level manner.
)
- Do not damage the oil seal lips on the transfer case.
- Remove oil and grease from the threads of the mounting bolts and nuts before tightening, or they will loosen.
- Be careful not to bend the joint portion when removing the propeller shaft, because this will damage the joint boot.
- If reusing the propeller shaft, align the mating marks of differential companion flange and propeller shaft assembly to install.
)
- When installing a new rear propeller shaft assembly, align the mark on the propeller shaft tube with the mark at the side of the differential companion flange.