The rear axle has the following features.
- The wheel bearing is a double-row angular contact ball bearing which incorporates the oil seals and is highly resistant to a thrust load.
- The drive shaft has BJ-TJ constant velocity joints.
- BJ side boot size has been reduced.
- ABS rotor for detecting the wheel speed is press-fitted to the BJ outer wheel. <Vehicles with ABS>
NOTE:
- BJ: Birfield Joint
- TJ: Tripod Joint
SPECIFICATIONS
| Item |
Specification |
|||
|---|---|---|---|---|
| Wheel bearing |
Type |
Double-row angular contact ball bearing |
||
| Bearing (OD x ID) mm |
70 ×
40 |
|||
| Drive shaft |
Type |
Outer |
BJ |
|
| Inner |
TJ |
|||
| Length (joint to joint) ×
outer diameter mm |
LH <2400> |
481 ×
22 |
||
| LH <2000-Turbo> |
468 ×
22.2 |
|||
| RH <2400> |
571 ×
22 |
|||
| RH <2000-Turbo> |
558 ×
22.2 |
|||
CONSTRUCTION DIAGRAM
)
)