|
| DIFFERENTIAL
SUPPORT MEMBER BUSHING REPLACEMENT
|
| <DIFFERENTIAL MOUNT BRACKET>
|
|
- Use special tool rear suspension bushing arbor (MB990883) to remove or install the bushing.
- Press-fit the bushing with its hollow portion facing in the direction shown.
- Press-fit the bushing until the bushing outer case end face is flush with the differential
mount bracket.
|
| <DIFFERENTIAL SUPPORT ARM>
|
|
- Use special tool mount bushing arbor (MB990984) to remove or install the bushing.
- Press-fit the bushing with its marks facing in the direction shown.
- Press-fit the bushing until the bushing outer case end face is flush with the differential
support arm.
|
)
)