[27B] REAR AXLE <4WD> - - ON-VEHICLE SERVICE - GEAR OIL REPLACEMENTPRINT PAGE / INDEX / PRIOR / NEXT
GEAR OIL REPLACEMENT
  1. Remove the dynamic damper and filler plug.
  1. Remove the drain plug and drain oil.
  1. Tighten the drain plug to the specified torque.
    2. Tightening torque: 64 ± 4 N·m
  1. Add the oil until the level comes to the lower portion of the filler plug hole.
    2. Specified gear oil:
    • Hypoid gear oil API classification GL-5 or higher
    • Above 10°C: SAE 90
    • Below 10°C: SAE 80W
  1. Tighten the filler plug to the specified torque.
    2. Tightening torque: 49 ± 9 N·m
  1. Tighten the dynamic damper mounting nut to the specified torque.
    2. Tightening torque: 44 ± 9 N·m
[27B] REAR AXLE <4WD> - - ON-VEHICLE SERVICE - GEAR OIL REPLACEMENTPRINT PAGE / INDEX / PRIOR / NEXT
©2004 Mitsubishi Motors Corporation