OSCILLOSCOPE INSPECTION PROCEDURE
| Terminal No. |
Check item |
Inspection conditions |
Normal condition (Waveform sample) |
|
|---|---|---|---|---|
| 45 <4G63, 4G64> 70 <4G69> |
Crank angle sensor |
Selector lever position: P |
Engine: Idling (vehicle stopped) |
Waveform A |
| 80 <4G63, 4G64> 79 <4G69> |
Vehicle speed signal |
Selector lever position: Sport mode (3rd gear <4A/T>
or 4th <5A/T>) |
Driving at constant speed of 50 km/h in 3rd gear ( 1,400 -
1,700 r/min) |
|
| 103 <4G63, 4G64> 64 <4G69> |
Input shaft speed sensor |
Waveform B |
||
| 104 <4G63, 4G64> 73 <4G69> |
Output shaft speed sensor |
|||
| 129 <4G63, 4G64> 128 <4G69> |
LR solenoid valve |
|
Force drive each solenoid valve (Actuator test) |
Waveform C |
| 120 <4G63, 4G64> 137 <4G69> |
UD solenoid valve |
|||
| 106 <4G63, 4G64> 136 <4G69> |
2ND solenoid valve |
|||
| 130 <4G63, 4G64> 138 <4G69> |
OD solenoid valve |
|||
| 119 <5A/T> |
RED solenoid valve |
|||
| 107 <4G63, 4G64> 130 <4G69> |
DCC solenoid valve |
|||
)
|
)
|
)
|