DIAGNOSIS FUNCTION

If there is a problem with any of the A/T system, the N range lamp will flash at a rate of approximately once per second.
If the N range lamp is flashing at a rate of approximately once per second, check the diagnosis output.

N range lamp flashing item

Input shaft speed sensor system

Output shaft speed sensor system

Solenoid valve system

Non-synchronization at various shift ranges

A/T control relay system

NOTE: If the "N" range lamp is flushing at a rate of approximately twice per second <Vehicles for Hong Kong spec.> or A/T fluid warning lamp is illuminating <Except for Hong Kong spec.>, the A/T fluid temperature is high. (It flushes when the fluid is approximately 125°C or more and goes off when the fluid is approximately 115°C or less.)


	DIAGNOSIS FUNCTION
	N RANGE LAMP SYSTEM
	If there is a problem with any of the A/T system, the N range lamp will flash at a rate of approximately once per second. If the N range lamp is flashing at a rate of approximately once per second, check the diagnosis output. N range lamp flashing item Input shaft speed sensor system Output shaft speed sensor system Solenoid valve system Non-synchronization at various shift ranges A/T control relay system NOTE: If the "N" range lamp is flushing at a rate of approximately twice per second <Vehicles for Hong Kong spec.> or A/T fluid warning lamp is illuminating <Except for Hong Kong spec.>, the A/T fluid temperature is high. (It flushes when the fluid is approximately 125°C or more and goes off when the fluid is approximately 115°C or less.)
	METHOD OF READING THE DIAGNOSIS CODE Use the MUT-II/III to read the diagnosis code. (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points .)
	METHOD OF ERASING THE DIAGNOSIS CODE Use the MUT-II/III to erase the diagnosis code. (Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points .)