)
- Disconnect the accelerator pedal position sensor connector.
- Measure resistance between terminal No. 2 (main power supply) and No. 1 (main earth) as well as between terminal No. 8 (sub power supply) and terminal No. 7 (sub earth) of the sensor connector.
Standard valve: 3.5 -
6.5 kΩ
- Measure resistance between terminal No. 2 (main power supply) and No. 3 (main output) as well as between terminal No. 8 (sub power supply) and No. 6 (sub output) of the sensor connector.
| Depress the accelerator pedal slowly. |
Resistance value changes in accordance with the accelerator pedal
depression smoothly. |
- If not within the standard value, or resistance value does not change smoothly, replace the accelerator pedal position sensor.
NOTE: After replacement, adjust the accelerator pedal position sensor. (Refer to 
.)
.)