STEP 1. MUT-II/III diagnosis code

Q: Diagnosis code set?

YES:  Inspection chart for diagnosis code (Refer to ).
NO:  Go to Step 2 .

STEP 2. MUT-II/III data list

• Refer to Data list reference table .

1. Item 14: Throttle position sensor (sub)
2. Item 77: Accelerator pedal position sensor (sub)
3. Item 78: Accelerator pedal position sensor (main)
4. Item 79: Throttle position sensor (main)

YES:  Go to Step 3 .
NO:  Perform the diagnosis code classified check procedure for the sensor that has shown an abnormal data value (Refer to Inspection Chart for Diagnosis Code ).

STEP 3. Check ignition coil spark.

Q: Is the check result normal?

YES:  Go to Step 4 .
NO:  Check ignition circuit system (Refer to Inspection Procedure 30 ).

STEP 4. Fuel pressure measurement.

• Fuel pressure measurement ).

YES:  Replace engine-A/T-ECU.
NO:  Repair.