[35A] BASIC BRAKE SYSTEM - - ON-VEHICLE SERVICE - BRAKE DRUM INSIDE DIAMETER CHECKPRINT PAGE / INDEX / PRIOR / NEXT
BRAKE DRUM INSIDE DIAMETER CHECK
  1. Remove the brake drum.
       
    1. Measure the inside diameter of the brake drum at two or more locations.
      2. Standard value: 228.6 mm
      Limit: 230.6 mm
    1. Replace the brake drums, shoe and lining assembly when wear exceeds the limit value or is badly imbalanced.
    [35A] BASIC BRAKE SYSTEM - - ON-VEHICLE SERVICE - BRAKE DRUM INSIDE DIAMETER CHECKPRINT PAGE / INDEX / PRIOR / NEXT
    ©2004 Mitsubishi Motors Corporation