REMOVAL AND INSTALLATION

Pre-removal Operation

Loosening the Parking Brake Cable Adjusting Nut (Refer to GROUP 36, On-vehicle Service - Parking Brake Lever Stroke Check and Adjustment ). <LH drive vehicles>

Loosening the Parking Brake Cable Adjusting Nut (Refer to GROUP 36, On-vehicle Service - Parking Brake Pedal Stroke Check and Adjustment ). <RH drive vehicles>

Post-installation Operation

Parking Brake Lever Stroke Adjustment (Refer to GROUP 36, On-vehicle Service - Parking Brake Lever Stroke Check and Adjustment ). <LH drive vehicles>

Parking Brake Pedal Stroke Adjustment (Refer to GROUP 36, On-vehicle Service - Parking Brake Pedal Stroke Check and Adjustment ). <RH drive vehicles>

			Removal steps
		1.	Brake drum
<<A>>		2.	Parking brake cable connection
		3.	Shoe-to-shoe spring
		4.	Adjuster lever
		5.	Auto adjuster assembly
		6.	Retainer spring
		7.	Shoe hold-down cup
		8.	Shoe hold-down spring
		9.	Shoe-to-lever spring
		10.	Shoe and lining assembly
		11.	Shoe and lever assembly
<<B>>	>>B<<	12.	Retainer
	>>A<<	13.	Wave washer
		14.	Parking lever
		15.	Shoe and lining assembly
		16.	Shoe hold-down pin
		17.	Brake pipe connection
		18.	Wheel cylinder assembly
		19.	Lock nut
		20.	Rear hub assembly [Refer to GROUP 34, Trailing arm assembly <2WD> or <4WD>].
		21.	Backing plate