MUT-III sub-assembly
A: Vehicle Communication Interface (V. C. I.)
B: MUT-III USB cable
C: MUT-III main harness A (Vehicles with CAN communication system)
D: MUT-III main harness B (Vehicles without CAN communication system)
E: MUT-III measurement adapter
F: MUT-III trigger harness
Checking the ABS (Diagnosis display using the MUT-III)
CAUTION
MUT-III main harness B (MB991911) should be used. MUT-III main harness A should not be used for this vehicle.
MB991529
Diagnosis code check harness
Checking the ABS (Diagnosis display using the ABS warning lamp)
MB991348
Test harness set
Checking the G sensor
[35B] ANTI-SKID BRAKING SYSTEM (ABS) - - SPECIAL TOOLS