Item No.	Check item	Checking requirements	Normal valve
11	Front-right ABS sensor	Perform a test run	Vehicle speeds displayed on the speedometer and MUT-II/III are identical.
12	Front-left ABS sensor
13	Rear-right ABS sensor
14	Rear-left ABS sensor
21	ABS-ECU power supply voltage	Ignition switch: ON	10 - 16 V
32	G-sensor output voltage <4WD>	When vehicle is stationary (level)	2.4 - 2.6 V
		When vehicle is being driven	1.0 - 4.0 V
36	Stoplight switch	Depress the brake pedal.	ON
		Release the brake pedal.	OFF

When the diagnosis system stops the ABS-ECU, the MUT-II/III display data will be unreliable.