REMOVAL AND INSTALLATION

*: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.

Pre-removal Operation

Raise the engine and transmission assembly until its weight is not applied to the insulator, and support it securely.

			Removal steps
		1.	Pressure hose clamp
		2.	Self-locking nut
		3.	Engine front mounting bracket

<DOHC>

CAUTION

*: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.

Pre-removal Operation

Raise the engine and transmission assembly until its weight is not applied to the insulator, and support it securely.

Reserve Tank Removal (Refer to GROUP 14, Radiator ).

Post-installation Operation

Reserve Tank Installation (Refer to GROUP 14, Radiator

		Removal steps
	1.	Pressure hose clamp
	2.	Self-locking nut
	3.	Engine mounting adapter
>>A<<	4.	Engine mounting stopper
	5.	Engine mounting

INSTALLATION SERVICE POINT

>>A<< ENGINE MOUNTING STOPPER INSTALLATION

Install the engine mounting stopper so that its arrow faces towards the engine.