REMOVAL AND INSTALLATION

CAUTION

*: Indicates parts which should be initially tightened, and then fully tightened after placing the vehicle horizontally and loading the full weight of the engine on the vehicle body.

<SOHC>

		Front roll stopper and centermember removal steps
	•	Under cover (Refer to GROUP 51, Under cover <4G6-SOHC>, <4G69>).
	1.	Front roll stopper connecting bolt
	2.	Centremember and front roll stopper assembly
	3.	Centremember
>>A<<	4.	Front roll stopper
		Rear roll stopper removal steps <4G63>
	5.	Rear roll stopper connecting bolt
	6.	Rear roll stopper connecting bolt
	7.	Rear roll mount bracket assembly
	8.	Clamp bracket
	9.	Rear roll mount bracket
	10.	Rear roll stopper
		Rear roll stopper removal steps <4G64-RH>
	•	Transfer assembly (Refer to GROUP 23A, Transfer ).
	•	Crossmember assembly (Refer to ).
	5.	Rear roll mount connecting bolt
	6.	Rear roll stopper connecting bolt
	11.	Rear roll stopper
		Rear roll rod bracket removal steps <4G64-LH, 4G69>
	•	Front exhaust pipe (Refer to GROUP 15, Exhaust pipe ).
	5.	Rear roll mount connecting bolt
	12.	Rear roll rod
	•	Transfer assembly (Refer to GROUP 23A, Transfer ).
	13.	Rear roll rod bracket

<DOHC>

		Front roll stopper and centermember removal steps
	•	Under cover (Refer to GROUP 51, Under cover ).
	1.	Crossmember bar
	2.	Front roll stopper connecting bolt
	3.	Centremember and front roll stopper assembly
	4.	Centremember
>>A<<	5.	Front roll stopper
		Rear roll stopper removal steps
	•	Transfer assembly (Refer to GROUP 23, Transfer ).
	•	Crossmember assembly (Refer to ).
	6.	Rear roll stopper connecting bolt
	7.	Rear roll stopper

INSTALLATION SERVICE POINT

>>A<< FRONT ROLL STOPPER INSTALLATION

Install the front roll stopper so that its hole points towards the front side of the vehicle.