Pre-removal and Post-installation Operation
|
)
| Removal steps |
|||
|---|---|---|---|
| • |
Side sill garnish (Refer to GROUP 51, Garnish  <Vehicles
without Overfender>
or <Vehicles with
Overfender>.) |
||
| 1. |
Splash shield |
||
<<A>> |
>>A<< |
2. |
Side turn signal lamp |
| • |
Headlamp assembly (Refer to GROUP 54A, Headlamp <2000>
or <2400>.) |
||
| 3. |
Fender |
REMOVAL SERVICE POINT
)
Use an appropriate tool such as special tool Ornament remover (MB990874) to pry out the
tab from the fender, and remove the side turn signal lamp.
INSTALLATION SERVICE POINT
)
Engage the hook with the fender panel, and install the side turn signal lamp.