)
| Waterproof film removal steps |
|||
|---|---|---|---|
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim  ). |
||
| 1. |
Pull handle bracket |
||
| 2. |
Waterproof film |
||
| Door inner opening weatherstrip removal steps |
|||
| • |
Cowl side trim (Refer to GROUP 52A, Trims ). |
||
| 3. |
Door inner opening weatherstrip (body side) |
||
| Door outer opening weatherstrip removal steps |
|||
| • |
Front door check mounting bolt (body side) (Refer to ). |
||
<<A>> |
>>C<< |
4. |
Door outer opening weatherstrip |
| Door beltline inner weatherstrip removal steps |
|||
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| 5. |
Door beltline inner weatherstrip |
||
| Door window glass runchannel removal steps |
|||
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| 1. |
Pull handle bracket |
||
| 2. |
Waterproof film |
||
| 5. |
Door beltline inner weatherstrip |
||
| >>B<< |
6. |
Door window glass runchannel |
|
| Door beltline moulding removal steps |
|||
| • |
Door mirror assembly (Refer to GROUP 51, Door Mirror ). |
||
| 7. |
Door beltline moulding |
DOUBLE-SIDED TAPE POSITION
)
)
| Waterproof film removal steps |
|||
|---|---|---|---|
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| 1. |
Pull handle bracket |
||
| 2. |
Waterproof film |
||
| Door inner opening weatherstrip removal steps |
|||
| • |
Rear seat (Refer to GROUP 52A, Trims ). |
||
| • |
Scuff plate (Refer to GROUP 52A, Trims ). |
||
| 3. |
Door inner opening weatherstrip (body side) |
||
| Door outer opening weatherstrip removal steps |
|||
| • |
Rear door check mounting bolt (body side) (Refer to ). |
||
| <<A>> |
>>C<< |
4. |
Door outer opening weatherstrip |
| Door beltline inner weatherstrip removal steps |
|||
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| 5. |
Door beltline inner weatherstrip |
||
| Door window glass runchannel removal steps |
|||
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| 1. |
Pull handle bracket |
||
| 2. |
Waterproof film |
||
| 5. |
Door beltline inner weatherstrip |
||
| 6. |
Door window glass runchannel |
||
| Door beltline moulding removal |
|||
| 7. |
Door beltline moulding |
||
| Door tape removal steps |
|||
| • |
Door trim assembly (Refer to GROUP 52A, Door Trim ). |
||
| >>A<< |
8. |
Door tape |
DOUBLE-SIDED TAPE POSITION
)
REMOVAL SERVICE POINT
)
Make a fabricated tool as shown in the illustration to remove the door weatherstrip.
INSTALLATION SERVICE POINTS
)
Apply the door tape in the location shown in the Figure of the instructions.
)
Assemble the run channel cut-out area with the thumb of the door mirror.
| APPLICABLE SIDE |
IDENTIFICATION COLOUR |
|---|---|
| Left door |
Natural (White) |
| Right door |
Pink |